Abtech Safety values the safety and well-being of workers above all else. We believe everyone should have access to reliable knowledge and the best safety equipment they need to work at height safely, and it's our mission to provide just that. So whether you're a seasoned pro or just starting, read on to discover our top tips for working safely at height.
CHOOSE RELIABLE SAFETY EQUIPMENT
Always wear the appropriate, properly fitted safety gear, such as fall protection harnesses, lanyards, and hard hats, when working at heights. British and European Law requires that your height safety equipment and fall protection systems are inspected and tested regularly.
CHOOSE THE RIGHT ANCHOR POINT
Identity secure anchor points to attach the safety equipment. An anchor for fall arrest must have a Working Load Limit of 12kN (EN795:2012). Rope access work requires an anchor point with a Working Load Limit of 15kN (BS7985:2013).
INSPECT SAFETY EQUIPMENT REGULARLY
Conduct routine inspections of all fall protection equipment to ensure they are in good working condition. Any damaged equipment should be replaced immediately.
Resource: WAHSA: Guidance on Inspecting Personal Fall Protection Equipment
TRAIN EMPLOYEES
Ensure all employees are fully trained to handle fall protection equipment correctly. They should also be aware of the associated safety and rescue procedures. Regular training helps reduce the likelihood of accidents.
PLAN FOR EMERGENCIES
Have a rescue plan in case of an emergency. Ensure all workers understand and are trained in all relevant rescue procedures.
Resource: WAHSA: Guidance on Rescue During Working At Height
UNDERSTAND REQUIREMENTS
It is crucial to follow the 'Hierarchy of Control' when it comes to working at heights. Firstly, the best approach is to avoid working at height whenever possible. If that is not feasible, the next step is to prevent accidents by utilizing collective measures such as handrails, guardrails, or other protective barriers. Lastly, in situations where working at height is unavoidable, it is vital to minimize the consequences of a potential fall by implementing collective measures or providing Personal Protective Equipment (PPE).
UNDERSTAND DIFFERENT SYSTEMS
Various systems are available to ensure safety in different work environments. Collective measures, such as the installation of handrails and guardrails, play a crucial role in preventing falls and protecting workers. Restraint systems are designed to restrict workers from reaching areas where they may be at risk of falling. Work positioning systems support workers by holding a part or all of their weight during the task, providing stability and preventing falls. Fall arrest systems, on the other hand, include equipment that can safely stop a fall in a controlled manner. Lastly, rope access is a specialised technique performed by trained professionals who utilise ropes and equipment to access difficult-to-reach areas safely.
AVOID SLIPPERY SURFACES
Be aware of the additional hazards such as the weather and environment. Avoid working on slippery surfaces or during wet weather. Use slip-resistant footwear to reduce the risk of slips, trips, and falls.
FOLLOW HEALTH AND SAFETY EXECUTIVE (HSE) REGULATIONS
You should always comply with all relevant HSE regulations and guidelines related to fall protection.
Resource: Health & Safety Executive
CONDUCT RISK ASSESSMENTS
Conduct regular risk assessments to identify potential fall hazards and take measures to minimize or eliminate them.
By following these tips and investing in high-quality fall protection equipment, you can help to prevent falls and keep workers safe when working at height.
Abtech Safety is committed to providing the highest quality fall protection equipment and training to ensure that workers can operate safely at height. Check out our range of safety harnesses and other fall protection equipment to find the right solution for your workplace.
Summary:
- Always wear proper safety equipment
- Choose the right anchor point
- Inspect equipment regularly
- Train employees
- Plan for emergencies
- Understand requirements
- Understand different systems
- Avoid slippery surfaces
- Follow HSE regulations
- Conduct risk assessments